Macro Guitar fretboard/fr
|
|
| Description |
|---|
| Crée un manche de guitare, le script Python est incroyable pour créer une forme complexe .... Cette macro crée un manche conique composé (ou non) à plusieurs échelles (ou non) avec écrou et fente de frette ou zéro emplacement de frette pour exporter vers le logiciel CAM Version macro : 0.4 Date dernière modification : 2020-01-09 Version FreeCAD : All Téléchargement : ToolBar Icon Auteur: ryback08, jsiddall |
| Auteur |
| ryback08, jsiddall |
| Téléchargement |
| ToolBar Icon |
| Liens |
| Page des macros Comment installer une macro Comment créer une barre d'outils |
| Version Macro |
| 0.4 |
| Dernière modification |
| 2020-01-09 |
| Version(s) FreeCAD |
| All |
| Raccourci clavier |
| None |
| Voir aussi |
Macro_Guitar_Nut 
|
Description
Guitar Fretboard Marker (Macro), incroyable script Python pour créer une forme complexe ....
Cette macro crée un composé conique (ou pas) avec un écrou et une fente de frette ou frette zéro destiné a être exporté dans un logiciel de FAO
Script
The ToolBar Icon 
Macro Guitar fretboard.FCMacro
# -*- coding: utf-8 -*-
# Form implementation generated from reading ui file 'dialog.ui'
#
# Created: Sat Jan 14 00:33:37 2012
# by: PyQt4 UI code generator 4.9
#
# WARNING! All changes made in this file will be lost!
#
#
###################################### FREECAD Macro - Draw fretboard guitar #############################################
# ressource : #
# Freecad dialog creation : http://sourceforge.net/apps/mediawiki/free-cad/index.php?title=Dialog_creation #
# Topological data scripting : http://sourceforge.net/apps/mediawiki/free-cad/index.php?title=Topological_data_scripting #
# Fret slot theory : http://www.jpbourgeois.org/guitar/frets.htm #
# #
# For personal use only and / or non-profit use #
# (C)2012 By LEPINE Florent #
# (C)2020 By Jeff Siddall #
# V0.1 - 2012/03/18 #
# V0.2 - 2018/01/25 : PySide #
# V0.3 - 2019/07/03 : Adaptation for 0.18 #
# V0.4 - 2020/01/08 : Major refactor to add multiscale frets and zerofret (Jeff Siddall) #
# Special thanks to FreeCAD team #
# #
##########################################################################################################################
# #
# ### English ### #
# This macro creates a conical compound (or not) multiscale (or not) fretboard with nut and fret slot to export to #
# CAM software #
# #
# ### Francais ### #
# Cette macro creer une touche a radius progressif (ou pas) avec les defonces du sillet et l'emplacement des frettes #
# afin d'etre exporter dans un module de parcourt d'outil CAM #
# #
##########################################################################################################################
# #
# ### Extra Notes ### #
# All Y-axis measurements are relative to fretboard centerline #
# Origin is middle of nut/zero fret #
# #
##########################################################################################################################
from PySide import QtCore, QtGui
import FreeCAD, Part, math
from FreeCAD import Base, Vector
try:
_fromUtf8 = QtCore.QString.fromUtf8
except AttributeError:
_fromUtf8 = lambda s: s
################################################################################################
######### begin functions ########
################################################################################################
# Function to return the X-value for a given fret
def fretx(fret, scalelen, offset):
xvalue = (scalelen * (1 - (0.5 ** (float(fret) / 12)))) + offset
return(xvalue)
# Function to return the neck edge Y-value for a given X value
def edgey(xvalue, nutwidth, edgetan):
yvalue = (xvalue * edgetan) + (nutwidth / 2)
return(yvalue)
# Function to return the fret X-axis crossing value for a given fret
def fretxcross(fret, scalelen1, scalelen2, perpscalediff):
offset = perpscalediff / 2
fret1x = fretx(fret, scalelen1, offset)
fret2x = fretx(fret, scalelen2, -offset)
xcross = (fret1x + fret2x) / 2
return(xcross)
# Function to return the fret angle tangent for a given fret
def frettan(fret, scalelen1, scalelen2, perpscalediff, nutwidth, edgetan):
offset = perpscalediff / 2
fret1x = fretx(fret, scalelen1, offset)
fret2x = fretx(fret, scalelen2, -offset)
tanval = (fret2x - fret1x) / (nutwidth + (edgetan * (fret2x + fret1x)))
return(tanval)
################################################################################################
######### begin of dialog box definition / debut de la definition de la boite de dialogue ######
################################################################################################
class Ui_Dialog(object):
def setupUi(self, Dialog):
Dialog.setObjectName(_fromUtf8("Dialog"))
Dialog.resize(600, 491)
self.label_zerofret = QtGui.QLabel(Dialog)
self.label_zerofret.setGeometry(QtCore.QRect(10, 10, 431, 24))
self.label_zerofret.setToolTip(_fromUtf8("Use a zero fret instead of a nut when checked"))
self.label_zerofret.setWhatsThis(_fromUtf8(""))
self.label_zerofret.setObjectName(_fromUtf8("label_zerofret"))
self.checkBox_zerofret = QtGui.QCheckBox(Dialog)
self.checkBox_zerofret.setGeometry(QtCore.QRect(460, 10, 51, 24))
self.checkBox_zerofret.setWhatsThis(_fromUtf8(""))
self.checkBox_zerofret.setObjectName(_fromUtf8("checkBox_zerofret"))
self.label_scalelen1 = QtGui.QLabel(Dialog)
self.label_scalelen1.setGeometry(QtCore.QRect(10, 30, 431, 24))
self.label_scalelen1.setToolTip(_fromUtf8(""))
self.label_scalelen1.setWhatsThis(_fromUtf8(""))
self.label_scalelen1.setObjectName(_fromUtf8("label_scalelen1"))
self.lineEdit_scalelen1 = QtGui.QLineEdit(Dialog)
self.lineEdit_scalelen1.setGeometry(QtCore.QRect(460, 30, 51, 24))
self.lineEdit_scalelen1.setWhatsThis(_fromUtf8(""))
self.lineEdit_scalelen1.setObjectName(_fromUtf8("lineEdit_scalelen1"))
self.label_scalelen2 = QtGui.QLabel(Dialog)
self.label_scalelen2.setGeometry(QtCore.QRect(10, 50, 431, 24))
self.label_scalelen2.setToolTip(_fromUtf8(""))
self.label_scalelen2.setWhatsThis(_fromUtf8(""))
self.label_scalelen2.setObjectName(_fromUtf8("label_scalelen2"))
self.lineEdit_scalelen2 = QtGui.QLineEdit(Dialog)
self.lineEdit_scalelen2.setGeometry(QtCore.QRect(460, 50, 51, 24))
self.lineEdit_scalelen2.setWhatsThis(_fromUtf8(""))
self.lineEdit_scalelen2.setObjectName(_fromUtf8("lineEdit_scalelen2"))
self.label_nutwidth = QtGui.QLabel(Dialog)
self.label_nutwidth.setGeometry(QtCore.QRect(10, 130, 431, 24))
self.label_nutwidth.setToolTip(_fromUtf8("Width of center of outside strings measured perpendicular to the neck where the middle of the nut/zero fret crosses the neck centerline."))
self.label_nutwidth.setObjectName(_fromUtf8("label_nutwidth"))
self.lineEdit_nutwidth = QtGui.QLineEdit(Dialog)
self.lineEdit_nutwidth.setGeometry(QtCore.QRect(460, 130, 51, 24))
self.lineEdit_nutwidth.setObjectName(_fromUtf8("lineEdit_nutwidth"))
self.lineEdit_nutradius = QtGui.QLineEdit(Dialog)
self.lineEdit_nutradius.setGeometry(QtCore.QRect(460, 190, 51, 24))
self.lineEdit_nutradius.setObjectName(_fromUtf8("lineEdit_nutradius"))
self.label_nutradius = QtGui.QLabel(Dialog)
self.label_nutradius.setGeometry(QtCore.QRect(10, 190, 431, 24))
self.label_nutradius.setToolTip(_fromUtf8("Measured where the middle of the nut/zero fret crosses the neck centerline. To convert to mm from inches multiply by 25.4. Ex: 7.5 in = 191 mm."))
self.label_nutradius.setObjectName(_fromUtf8("label_nutradius"))
self.lineEdit_perpfret = QtGui.QLineEdit(Dialog)
self.lineEdit_perpfret.setGeometry(QtCore.QRect(460, 110, 51, 24))
self.lineEdit_perpfret.setObjectName(_fromUtf8("lineEdit_perpfret"))
self.label_perpfret = QtGui.QLabel(Dialog)
self.label_perpfret.setGeometry(QtCore.QRect(10, 110, 431, 24))
self.label_perpfret.setToolTip(_fromUtf8(""))
self.label_perpfret.setObjectName(_fromUtf8("label_perpfret"))
self.lineEdit_bridgewidth = QtGui.QLineEdit(Dialog)
self.lineEdit_bridgewidth.setGeometry(QtCore.QRect(460, 150, 51, 24))
self.lineEdit_bridgewidth.setObjectName(_fromUtf8("lineEdit_bridgewidth"))
self.label_bridgewidth = QtGui.QLabel(Dialog)
self.label_bridgewidth.setGeometry(QtCore.QRect(10, 150, 431, 24))
self.label_bridgewidth.setToolTip(_fromUtf8("Width of center of outside strings measured perpendicular to the neck where the middle of the bridge crosses the neck centerline at the saddles."))
self.label_bridgewidth.setObjectName(_fromUtf8("label_bridgewidth"))
self.lineEdit_bridgeradius = QtGui.QLineEdit(Dialog)
self.lineEdit_bridgeradius.setGeometry(QtCore.QRect(460, 210, 51, 24))
self.lineEdit_bridgeradius.setObjectName(_fromUtf8("lineEdit_bridgeradius"))
self.label_bridgeradius = QtGui.QLabel(Dialog)
self.label_bridgeradius.setGeometry(QtCore.QRect(10, 210, 431, 24))
self.label_bridgeradius.setToolTip(_fromUtf8("Measured at neck centerline at saddles. To convert to mm from inches multiply by 25.4. Ex: 25 in = 635 mm."))
self.label_bridgeradius.setObjectName(_fromUtf8("label_bridgeradius"))
self.label_thicknessboard = QtGui.QLabel(Dialog)
self.label_thicknessboard.setGeometry(QtCore.QRect(10, 90, 431, 24))
self.label_thicknessboard.setToolTip(_fromUtf8(""))
self.label_thicknessboard.setObjectName(_fromUtf8("label_thicknessboard"))
self.lineEdit_thicknessboard = QtGui.QLineEdit(Dialog)
self.lineEdit_thicknessboard.setGeometry(QtCore.QRect(460, 90, 51, 24))
self.lineEdit_thicknessboard.setObjectName(_fromUtf8("lineEdit_thicknessboard"))
self.label_nfret = QtGui.QLabel(Dialog)
self.label_nfret.setGeometry(QtCore.QRect(10, 70, 431, 24))
self.label_nfret.setToolTip(_fromUtf8(""))
self.label_nfret.setObjectName(_fromUtf8("label_nfret"))
self.lineEdit_nfret = QtGui.QLineEdit(Dialog)
self.lineEdit_nfret.setGeometry(QtCore.QRect(460, 70, 51, 24))
self.lineEdit_nfret.setObjectName(_fromUtf8("lineEdit_nfret"))
self.label_fretslotdepth = QtGui.QLabel(Dialog)
self.label_fretslotdepth.setGeometry(QtCore.QRect(10, 270, 431, 24))
self.label_fretslotdepth.setToolTip(_fromUtf8(""))
self.label_fretslotdepth.setObjectName(_fromUtf8("label_fretslotdepth"))
self.lineEdit_fretslotdepth = QtGui.QLineEdit(Dialog)
self.lineEdit_fretslotdepth.setGeometry(QtCore.QRect(460, 270, 51, 24))
self.lineEdit_fretslotdepth.setObjectName(_fromUtf8("lineEdit_fretslotdepth"))
self.lineEdit_fretslotwidth = QtGui.QLineEdit(Dialog)
self.lineEdit_fretslotwidth.setGeometry(QtCore.QRect(460, 290, 51, 24))
self.lineEdit_fretslotwidth.setObjectName(_fromUtf8("lineEdit_fretslotwidth"))
self.label_fretslotwidth = QtGui.QLabel(Dialog)
self.label_fretslotwidth.setGeometry(QtCore.QRect(10, 290, 431, 24))
self.label_fretslotwidth.setToolTip(_fromUtf8(""))
self.label_fretslotwidth.setObjectName(_fromUtf8("label_fretslotwidth"))
self.label_fretslotmargin = QtGui.QLabel(Dialog)
self.label_fretslotmargin.setGeometry(QtCore.QRect(10, 310, 431, 24))
self.label_fretslotmargin.setToolTip(_fromUtf8(""))
self.label_fretslotmargin.setObjectName(_fromUtf8("label_fretslotmargin"))
self.lineEdit_fretslotmargin = QtGui.QLineEdit(Dialog)
self.lineEdit_fretslotmargin.setGeometry(QtCore.QRect(460, 310, 51, 24))
self.lineEdit_fretslotmargin.setObjectName(_fromUtf8("lineEdit_fretslotmargin"))
self.label_nutslotwidth = QtGui.QLabel(Dialog)
self.label_nutslotwidth.setGeometry(QtCore.QRect(10, 350, 431, 24))
self.label_nutslotwidth.setToolTip(_fromUtf8("Nut thickness. Not used when zerofret is selected."))
self.label_nutslotwidth.setObjectName(_fromUtf8("label_nutslotwidth"))
self.lineEdit_nutslotwidth = QtGui.QLineEdit(Dialog)
self.lineEdit_nutslotwidth.setGeometry(QtCore.QRect(460, 350, 51, 24))
self.lineEdit_nutslotwidth.setObjectName(_fromUtf8("lineEdit_nutslotwidth"))
self.label_nutslotdepth = QtGui.QLabel(Dialog)
self.label_nutslotdepth.setGeometry(QtCore.QRect(10, 370, 431, 24))
self.label_nutslotdepth.setToolTip(_fromUtf8("Bottom of nut slot is flat"))
self.label_nutslotdepth.setObjectName(_fromUtf8("label_nutslotdepth"))
self.lineEdit_nutslotdepth = QtGui.QLineEdit(Dialog)
self.lineEdit_nutslotdepth.setGeometry(QtCore.QRect(460, 370, 51, 24))
self.lineEdit_nutslotdepth.setObjectName(_fromUtf8("lineEdit_nutslotdepth"))
self.lineEdit_lastfretlen = QtGui.QLineEdit(Dialog)
self.lineEdit_lastfretlen.setGeometry(QtCore.QRect(460, 170, 51, 24))
self.lineEdit_lastfretlen.setObjectName(_fromUtf8("lineEdit_lastfretlen"))
self.label_lastfretlen = QtGui.QLabel(Dialog)
self.label_lastfretlen.setGeometry(QtCore.QRect(10, 170, 431, 24))
self.label_lastfretlen.setToolTip(_fromUtf8(""))
self.label_lastfretlen.setObjectName(_fromUtf8("label_lastfretlen"))
self.lineEdit_lengthbeforenut = QtGui.QLineEdit(Dialog)
self.lineEdit_lengthbeforenut.setGeometry(QtCore.QRect(460, 390, 51, 24))
self.lineEdit_lengthbeforenut.setObjectName(_fromUtf8("lineEdit_lengthbeforenut"))
self.label_lengthbeforenut = QtGui.QLabel(Dialog)
self.label_lengthbeforenut.setGeometry(QtCore.QRect(10, 390, 431, 24))
self.label_lengthbeforenut.setToolTip(_fromUtf8(""))
self.label_lengthbeforenut.setObjectName(_fromUtf8("label_lengthbeforenut"))
self.label_stringmargin1 = QtGui.QLabel(Dialog)
self.label_stringmargin1.setGeometry(QtCore.QRect(10, 230, 431, 24))
self.label_stringmargin1.setToolTip(_fromUtf8("Distance from edge of fretboard measured perpendicular to neck centerline for scale length 1"))
self.label_stringmargin1.setObjectName(_fromUtf8("label_stringmargin1"))
self.lineEdit_stringmargin1 = QtGui.QLineEdit(Dialog)
self.lineEdit_stringmargin1.setGeometry(QtCore.QRect(460, 230, 51, 24))
self.lineEdit_stringmargin1.setObjectName(_fromUtf8("lineEdit_stringmargin1"))
self.label_stringmargin2 = QtGui.QLabel(Dialog)
self.label_stringmargin2.setGeometry(QtCore.QRect(10, 250, 431, 24))
self.label_stringmargin2.setToolTip(_fromUtf8("Distance from edge of fretboard measured perpendicular to neck centerline for scale length 2"))
self.label_stringmargin2.setObjectName(_fromUtf8("label_stringmargin2"))
self.lineEdit_stringmargin2 = QtGui.QLineEdit(Dialog)
self.lineEdit_stringmargin2.setGeometry(QtCore.QRect(460, 250, 51, 24))
self.lineEdit_stringmargin2.setObjectName(_fromUtf8("lineEdit_stringmargin2"))
self.OK = QtGui.QPushButton(Dialog)
self.OK.setGeometry(QtCore.QRect(263, 450, 75, 32))
self.OK.setObjectName(_fromUtf8("OK"))
self.label_mm_01 = QtGui.QLabel(Dialog)
self.label_mm_01.setGeometry(QtCore.QRect(520, 30, 30, 24))
self.label_mm_01.setToolTip(_fromUtf8(""))
self.label_mm_01.setWhatsThis(_fromUtf8(""))
self.label_mm_01.setObjectName(_fromUtf8("label_mm_01"))
self.label_mm_02 = QtGui.QLabel(Dialog)
self.label_mm_02.setGeometry(QtCore.QRect(520, 90, 30, 24))
self.label_mm_02.setToolTip(_fromUtf8(""))
self.label_mm_02.setWhatsThis(_fromUtf8(""))
self.label_mm_02.setObjectName(_fromUtf8("label_mm_02"))
self.label_mm_03 = QtGui.QLabel(Dialog)
self.label_mm_03.setGeometry(QtCore.QRect(520, 170, 30, 24))
self.label_mm_03.setToolTip(_fromUtf8(""))
self.label_mm_03.setWhatsThis(_fromUtf8(""))
self.label_mm_03.setObjectName(_fromUtf8("label_mm_03"))
self.label_mm_04 = QtGui.QLabel(Dialog)
self.label_mm_04.setGeometry(QtCore.QRect(520, 130, 30, 24))
self.label_mm_04.setToolTip(_fromUtf8(""))
self.label_mm_04.setWhatsThis(_fromUtf8(""))
self.label_mm_04.setObjectName(_fromUtf8("label_mm_04"))
self.label_mm_05 = QtGui.QLabel(Dialog)
self.label_mm_05.setGeometry(QtCore.QRect(520, 270, 30, 24))
self.label_mm_05.setToolTip(_fromUtf8(""))
self.label_mm_05.setWhatsThis(_fromUtf8(""))
self.label_mm_05.setObjectName(_fromUtf8("label_mm_05"))
self.label_mm_06 = QtGui.QLabel(Dialog)
self.label_mm_06.setGeometry(QtCore.QRect(520, 290, 30, 24))
self.label_mm_06.setToolTip(_fromUtf8(""))
self.label_mm_06.setWhatsThis(_fromUtf8(""))
self.label_mm_06.setObjectName(_fromUtf8("label_mm_06"))
self.label_mm_07 = QtGui.QLabel(Dialog)
self.label_mm_07.setGeometry(QtCore.QRect(520, 310, 30, 24))
self.label_mm_07.setToolTip(_fromUtf8(""))
self.label_mm_07.setWhatsThis(_fromUtf8(""))
self.label_mm_07.setObjectName(_fromUtf8("label_mm_07"))
self.label_mm_08 = QtGui.QLabel(Dialog)
self.label_mm_08.setGeometry(QtCore.QRect(520, 350, 30, 24))
self.label_mm_08.setToolTip(_fromUtf8(""))
self.label_mm_08.setWhatsThis(_fromUtf8(""))
self.label_mm_08.setObjectName(_fromUtf8("label_mm_08"))
self.label_mm_09 = QtGui.QLabel(Dialog)
self.label_mm_09.setGeometry(QtCore.QRect(520, 370, 30, 24))
self.label_mm_09.setToolTip(_fromUtf8(""))
self.label_mm_09.setWhatsThis(_fromUtf8(""))
self.label_mm_09.setObjectName(_fromUtf8("label_mm_09"))
self.label_mm_10 = QtGui.QLabel(Dialog)
self.label_mm_10.setGeometry(QtCore.QRect(520, 390, 30, 24))
self.label_mm_10.setToolTip(_fromUtf8(""))
self.label_mm_10.setWhatsThis(_fromUtf8(""))
self.label_mm_10.setObjectName(_fromUtf8("label_mm_10"))
self.label_mm_11 = QtGui.QLabel(Dialog)
self.label_mm_11.setGeometry(QtCore.QRect(520, 150, 30, 24))
self.label_mm_11.setToolTip(_fromUtf8(""))
self.label_mm_11.setWhatsThis(_fromUtf8(""))
self.label_mm_11.setObjectName(_fromUtf8("label_mm_11"))
self.label_mm_12 = QtGui.QLabel(Dialog)
self.label_mm_12.setGeometry(QtCore.QRect(520, 50, 30, 24))
self.label_mm_12.setToolTip(_fromUtf8(""))
self.label_mm_12.setWhatsThis(_fromUtf8(""))
self.label_mm_12.setObjectName(_fromUtf8("label_mm_12"))
self.label_mm_13 = QtGui.QLabel(Dialog)
self.label_mm_13.setGeometry(QtCore.QRect(520, 230, 30, 24))
self.label_mm_13.setToolTip(_fromUtf8(""))
self.label_mm_13.setWhatsThis(_fromUtf8(""))
self.label_mm_13.setObjectName(_fromUtf8("label_mm_13"))
self.label_mm_14 = QtGui.QLabel(Dialog)
self.label_mm_14.setGeometry(QtCore.QRect(520, 190, 80, 24))
self.label_mm_14.setToolTip(_fromUtf8(""))
self.label_mm_14.setWhatsThis(_fromUtf8(""))
self.label_mm_14.setObjectName(_fromUtf8("label_mm_14"))
self.label_mm_15 = QtGui.QLabel(Dialog)
self.label_mm_15.setGeometry(QtCore.QRect(520, 210, 80, 24))
self.label_mm_15.setToolTip(_fromUtf8(""))
self.label_mm_15.setWhatsThis(_fromUtf8(""))
self.label_mm_15.setObjectName(_fromUtf8("label_mm_15"))
self.label_mm_16 = QtGui.QLabel(Dialog)
self.label_mm_16.setGeometry(QtCore.QRect(520, 250, 80, 24))
self.label_mm_16.setToolTip(_fromUtf8(""))
self.label_mm_16.setWhatsThis(_fromUtf8(""))
self.label_mm_16.setObjectName(_fromUtf8("label_mm_16"))
self.dialog = Dialog ### Add to close windows at end of macro
self.retranslateUi(Dialog)
QtCore.QObject.connect(self.OK,QtCore.SIGNAL("pressed()"),self.createFretboard) ###### See Freecad doc - connect pushbuton #####
QtCore.QMetaObject.connectSlotsByName(Dialog)
Dialog.setTabOrder(self.checkBox_zerofret, self.lineEdit_scalelen1)
Dialog.setTabOrder(self.lineEdit_scalelen1, self.lineEdit_scalelen2)
Dialog.setTabOrder(self.lineEdit_scalelen2, self.lineEdit_nfret)
Dialog.setTabOrder(self.lineEdit_nfret, self.lineEdit_thicknessboard)
Dialog.setTabOrder(self.lineEdit_thicknessboard, self.lineEdit_perpfret)
Dialog.setTabOrder(self.lineEdit_perpfret, self.lineEdit_nutwidth)
Dialog.setTabOrder(self.lineEdit_nutwidth, self.lineEdit_bridgewidth)
Dialog.setTabOrder(self.lineEdit_bridgewidth, self.lineEdit_lastfretlen)
Dialog.setTabOrder(self.lineEdit_lastfretlen, self.lineEdit_nutradius)
Dialog.setTabOrder(self.lineEdit_nutradius, self.lineEdit_bridgeradius)
Dialog.setTabOrder(self.lineEdit_bridgeradius, self.lineEdit_stringmargin1)
Dialog.setTabOrder(self.lineEdit_stringmargin1, self.lineEdit_stringmargin2)
Dialog.setTabOrder(self.lineEdit_stringmargin2, self.lineEdit_fretslotdepth)
Dialog.setTabOrder(self.lineEdit_fretslotdepth, self.lineEdit_fretslotwidth)
Dialog.setTabOrder(self.lineEdit_fretslotwidth, self.lineEdit_fretslotmargin)
Dialog.setTabOrder(self.lineEdit_fretslotmargin, self.lineEdit_nutslotwidth)
Dialog.setTabOrder(self.lineEdit_nutslotwidth, self.lineEdit_nutslotdepth)
Dialog.setTabOrder(self.lineEdit_nutslotdepth, self.lineEdit_lengthbeforenut)
Dialog.setTabOrder(self.lineEdit_lengthbeforenut, self.OK)
def retranslateUi(self, Dialog):
Dialog.setWindowTitle(_fromUtf8("Multiscale Compound Fretboard Maker"))
self.label_zerofret.setText(_fromUtf8("Use zero fret - Utilisez z" + chr(233) + "ro frette"))
self.checkBox_zerofret.setChecked(True)
self.label_scalelen1.setText(_fromUtf8("Scale Length 1 - Diapason 1"))
self.lineEdit_scalelen1.setText(_fromUtf8("864"))
self.label_scalelen2.setText(_fromUtf8("Scale Length 2 - Diapason 2"))
self.lineEdit_scalelen2.setText(_fromUtf8("940"))
self.label_nutwidth.setText(_fromUtf8("Nut outer string width"))
self.lineEdit_nutwidth.setText(_fromUtf8("38"))
self.label_nutradius.setText(_fromUtf8("Radius at nut - Rayon au sillet"))
self.lineEdit_nutradius.setText(_fromUtf8("191"))
self.label_perpfret.setText(_fromUtf8("Perpendicular fret - Frette perpendiculaire"))
self.lineEdit_perpfret.setText(_fromUtf8("7"))
self.label_bridgewidth.setText(_fromUtf8("Bridge outer string width"))
self.lineEdit_bridgewidth.setText(_fromUtf8("72"))
self.label_bridgeradius.setText(_fromUtf8("Radius at bridge - Rayon au pont"))
self.lineEdit_bridgeradius.setText(_fromUtf8("635"))
self.label_thicknessboard.setText(_fromUtf8("Board thickness - Epaisseur de touche"))
self.lineEdit_thicknessboard.setText(_fromUtf8("6.4"))
self.label_nfret.setText(_fromUtf8("No. frets - No. de frettes"))
self.lineEdit_nfret.setText(_fromUtf8("20"))
self.label_fretslotdepth.setText(_fromUtf8("Depth of fret slot - Pronfondeur rainure de frette"))
self.lineEdit_fretslotdepth.setText(_fromUtf8("2.0"))
self.label_fretslotwidth.setText(_fromUtf8("Width of fret slot - Largeur rainure de frette"))
self.lineEdit_fretslotwidth.setText(_fromUtf8("0.6"))
self.label_fretslotmargin.setText(_fromUtf8("Fret slot margin - Marge de fente de frette"))
self.lineEdit_fretslotmargin.setText(_fromUtf8("3.0"))
self.label_nutslotwidth.setText(_fromUtf8("Width of nut slot - largeur du sillet"))
self.lineEdit_nutslotwidth.setText(_fromUtf8("3.1"))
self.label_nutslotdepth.setText(_fromUtf8("Depth of nut slot - profondeur du sillet"))
self.lineEdit_nutslotdepth.setText(_fromUtf8("3.0"))
self.label_lastfretlen.setText(_fromUtf8("Length after last fret - D" + chr(233) + "port apr" + chr(232) + "s la derni" + chr(232) + "re frette"))
self.lineEdit_lastfretlen.setText(_fromUtf8("10.0"))
self.label_lengthbeforenut.setText(_fromUtf8("Length before zero fret/nut - D" + chr(233) + "port avant le sillet"))
self.lineEdit_lengthbeforenut.setText(_fromUtf8("6.4"))
self.label_stringmargin1.setText(_fromUtf8("String margin 1 - Marge de cha" + chr(238) + " ne 1"))
self.lineEdit_stringmargin1.setText(_fromUtf8("4.1"))
self.label_stringmargin2.setText(_fromUtf8("String margin 2 - Marge de cha" + chr(238) + " ne 2"))
self.lineEdit_stringmargin2.setText(_fromUtf8("5.1"))
self.OK.setText(_fromUtf8("Create"))
self.label_mm_01.setText(_fromUtf8("mm"))
self.label_mm_02.setText(_fromUtf8("mm"))
self.label_mm_03.setText(_fromUtf8("mm"))
self.label_mm_04.setText(_fromUtf8("mm"))
self.label_mm_05.setText(_fromUtf8("mm"))
self.label_mm_06.setText(_fromUtf8("mm"))
self.label_mm_07.setText(_fromUtf8("mm"))
self.label_mm_08.setText(_fromUtf8("mm"))
self.label_mm_09.setText(_fromUtf8("mm"))
self.label_mm_10.setText(_fromUtf8("mm"))
self.label_mm_11.setText(_fromUtf8("mm"))
self.label_mm_12.setText(_fromUtf8("mm"))
self.label_mm_13.setText(_fromUtf8("mm"))
self.label_mm_14.setText(_fromUtf8("mm"))
self.label_mm_15.setText(_fromUtf8("mm"))
self.label_mm_16.setText(_fromUtf8("mm"))
############################################################################################
######### end of dialog box definition / fin de la definition de la boite de dialogue ######
############################################################################################
def createFretboard(self):
try:
#################################################################
####### first we check if valid numbers have been entered #######
#################################################################
scalelen1 = float(self.lineEdit_scalelen1.text()) # diapason
scalelen2 = float(self.lineEdit_scalelen2.text()) # diapason
nutradius = float(self.lineEdit_nutradius.text()) # radius de la touche au sillet
bridgewidth = float(self.lineEdit_bridgewidth.text()) # largeur de la touche a la derniere frette
bridgeradius = float(self.lineEdit_bridgeradius.text()) # radius de la touche a la derniere frette
thicknessboard = float(self.lineEdit_thicknessboard.text()) # epaisseur de la touche
nfret = int(self.lineEdit_nfret.text()) # nombre de frettes
perpfret = float(self.lineEdit_perpfret.text()) # perpendicular fret
fretslotdepth = float(self.lineEdit_fretslotdepth.text()) # profondeur du solt des frettes
fretslotwidth = float(self.lineEdit_fretslotwidth.text()) # epaisseur du slot des frettes
fretmargin = float(self.lineEdit_fretslotmargin.text()) # deport du slot des frettes par rapport au bord
lastfretlen = float(self.lineEdit_lastfretlen.text()) # espace entre la derniere frette et la fin de la touche
lengthbeforenut = float(self.lineEdit_lengthbeforenut.text()) # espace restant avant le sillet
stringmargin1 = float(self.lineEdit_stringmargin1.text()) # string margin
stringmargin2 = float(self.lineEdit_stringmargin2.text()) # string margin
nutwidth = float(self.lineEdit_nutwidth.text()) # largeur de la touche au sillet
nutslotwidth = float(self.lineEdit_nutslotwidth.text()) # longueur du sille
nutslotdepth = float(self.lineEdit_nutslotdepth.text()) # profondeur du sillet
except ValueError:
print( "Error! values must be valid numbers!")
return None
else:
if self.checkBox_zerofret.checkState() == 0:
zerofret = 0
nutslotwidth = float(nutslotwidth)
else:
zerofret = 1
nutslotwidth = 0.0
##### convert all value in float #####
scalelen1 = float(scalelen1)
scalelen2 = float(scalelen2)
nutwidth = float(nutwidth)
nutradius = float(nutradius)
bridgewidth = float(bridgewidth)
bridgeradius = float(bridgeradius)
thicknessboard = float(thicknessboard)
nfret = float(nfret)
perpfret = float(perpfret)
fretslotdepth = float(fretslotdepth)
fretslotwidth = float(fretslotwidth)
fretmargin = float(fretmargin)
nutslotdepth = float(nutslotdepth)
lastfretlen = float(lastfretlen)
lengthbeforenut = float(lengthbeforenut)
stringmargin1 = float(stringmargin1)
stringmargin2 = float(stringmargin2)
print( "OK, all values are good, let's go")
#####################################################################
###### calculate first/last/perpendicular fret values ######
#####################################################################
perplen1 = fretx(perpfret, scalelen1, 0) # see formule to calculate fret length
perplen2 = fretx(perpfret, scalelen2, 0)
perpscalediff = perplen2 - perplen1
halfperpscalediff = perpscalediff / 2
fbwidthdiff = bridgewidth - nutwidth
edgetan = fbwidthdiff / ((scalelen1 + scalelen2) / 2) / 2 # half of fbwidthdiff is on each side of fretboard
zerofrettan = frettan(0, scalelen1, scalelen2, perpscalediff, nutwidth, edgetan)
endfrettan = frettan(nfret, scalelen1, scalelen2, perpscalediff, nutwidth, edgetan)
########################################################################
print("1 - Create fretboard bottom")
########################################################################
######## Fretboard Vector ######
vnb1x = fretx(0, scalelen1, halfperpscalediff) - (zerofrettan * stringmargin1) # use fret angle and X value of the zero fret to find new X value with stringmargin
vnb1y = edgey(vnb1x, nutwidth, edgetan) + stringmargin1 # use new X value to find the Y value
vnb1 = Vector(vnb1x, vnb1y, 0)
vbb1x = fretx(nfret, scalelen1, halfperpscalediff) - (endfrettan * stringmargin1) + lastfretlen
#vbb1x = fretx(nfret, scalelen1, halfperpscalediff)
vbb1y = edgey(vbb1x, nutwidth, edgetan) + stringmargin1
vbb1 = Vector(vbb1x, vbb1y, 0)
vbb2x = fretx(nfret, scalelen2, -halfperpscalediff) + (endfrettan * stringmargin2) + lastfretlen
#vbb2x = fretx(nfret, scalelen2, -halfperpscalediff)
vbb2y = -edgey(vbb2x, nutwidth, edgetan) - stringmargin2
vbb2 = Vector(vbb2x, vbb2y, 0)
vnb2x = fretx(0, scalelen2, -halfperpscalediff) + (zerofrettan * stringmargin2)
vnb2y = -edgey(vnb2x, nutwidth, edgetan) - stringmargin2
vnb2 = Vector(vnb2x, vnb2y, 0)
######## Nut Vector ######
adjnutslotwidth = nutslotwidth / math.cos(math.atan(zerofrettan)) # if nut slot is on an angle its X values need to be corrected
nutx = -(lengthbeforenut + adjnutslotwidth) # nut is a linear negative x shift
vbnb1x = vnb1x + nutx # add to the end of the fretboard
vbnb1y = edgey(vbnb1x, nutwidth, edgetan) + stringmargin1
vbnb1 = Vector(vbnb1x, vbnb1y, 0)
vbnb2x = vnb2x + nutx
vbnb2y = -edgey(vbnb2x, nutwidth, edgetan) - stringmargin2
vbnb2 = Vector(vbnb2x, vbnb2y, 0)
######## Draw ######
pointslist = [vbnb1,vnb1,vbb1,vbb2,vnb2,vbnb2,vbnb1]
fretboardwire = Part.makePolygon(pointslist)
#Part.show(fretboardwire)
fretboardbottom = Part.Face(fretboardwire)
#Part.show(fretboardbottom)
fbextrude=fretboardbottom.extrude(Vector(0,0,thicknessboard*2))
#Part.show(fbextrude)
########################################################################
print("2 - Create fretboard top (radius)")
########################################################################
######################## radius at nut ##############################
# the fretboard top must extend beyond the nut to ensure there is no clipping
# so calculate the values for the end of the fretboard relative to the nut
radslope = (bridgeradius - nutradius) / ((scalelen1 + scalelen2) / 2) # Find the slope of the compound radius
minx = min(vbnb1x, vbnb2x) # position the end of the fretboard top at the minimum X value
cn1rad = nutradius + (minx * radslope) # Calculate the correct radius for the end of the fretboard
cn1 = Part.makeCircle(cn1rad, Vector(minx, 0, -cn1rad + thicknessboard), Vector(1,0,0), 70, 110)
#Part.show(cn1)
################## radius at bridge - rayon au pont #####################
cn2 = Part.makeCircle(bridgeradius, Vector(((scalelen1 + scalelen2) / 2), 0, -bridgeradius + thicknessboard), Vector(1,0,0), 70, 110)
#Part.show(cn2)
################## face of 2 radius - assemblage des 2 radius ###########
compradius = Part.makeRuledSurface(cn1, cn2)
#Part.show(compradius)
ftextrude=compradius.extrude(Vector(0,0,-(thicknessboard * 2)))
#Part.show(ftextrude)
########################################################################
print("3 - Regroup fretboard bottom & top")
########################################################################
cleanfretboard = ftextrude.common(fbextrude)
#Part.show(cleanfretboard)
if zerofret:
########################################################################
print("4 - Skipping nut because zerofret was selected")
print("5 - Skipping nut because zerofret was selected")
########################################################################
else:
########################################################################
print("4 - Make nut")
########################################################################
######## Nut Vector ######
vnt1x = -(bridgewidth * zerofrettan) # nut crosses centerline at x=0, y=0 and nut slot needs to be wider than fretboard (i.e.: bridgewidth)
vnt1 = Vector(vnt1x, bridgewidth, thicknessboard)
vnt2 = Vector(-vnt1x, -bridgewidth, thicknessboard)
vnt3x = -vnt1x - adjnutslotwidth
vnt3 = Vector(vnt3x, -bridgewidth, thicknessboard)
vnt4x = vnt1x - adjnutslotwidth
vnt4 = Vector(vnt4x, bridgewidth, thicknessboard)
######## Draw nut ######
pointslist = [vnt1,vnt2,vnt3,vnt4,vnt1]
nutwire = Part.makePolygon(pointslist)
nutface = Part.Face(nutwire)
nutextrude=nutface.extrude(Vector(0,0,-nutslotdepth))
#Part.show(nutextrude)
########################################################################
print("5 - Add nut")
########################################################################
fretboardnut = cleanfretboard.cut(nutextrude)
#Part.show(fretboardnut)
########################################################################
print("6 - Add " + str(int(nfret)) + " frets")
########################################################################
#####################################################################
############## Radius on fretboard - depth fret slot ############
#####################################################################
fretslotradius=compradius.extrude(Vector(0,0,-fretslotdepth)) # radius (top of fretboard) minus fret slot depth
#####################################################################
############## outline fretboard - margin fret slot ############
#####################################################################
vnb1fs = Vector(vbnb1x, (vbnb1y - fretmargin), 0) # use the fretboard dimensions as a starting point since the same slope will be used
vbb1fs = Vector(vbb1x, (vbb1y - fretmargin), 0)
vbb2fs = Vector(vbb2x, (vbb2y + fretmargin), 0)
vnb2fs = Vector(vbnb2x, (vbnb2y + fretmargin), 0)
pointslistfs = [vnb1fs,vbb1fs,vbb2fs,vnb2fs,vnb1fs]
fretboardwirefs = Part.makePolygon(pointslistfs)
#Part.show(fretboardwirefs)
fretboardbottomfs = Part.Face(fretboardwirefs)
#Part.show(fretboardbottomfs)
fbextrudefs=fretboardbottomfs.extrude(Vector(0,0,thicknessboard*2)) # fretboardbottom with margin
#Part.show(fbextrudefs)
i=0
incnfret = 0
if (zerofret):
incnfret = -1 # use a zero fret if enabled
while (incnfret < nfret): # draw all frets
incnfret = incnfret + 1
incxcross = fretxcross(incnfret, scalelen1, scalelen2, perpscalediff)
incfrettan = frettan(incnfret, scalelen1, scalelen2, perpscalediff, nutwidth, edgetan)
incfretangle = math.atan(incfrettan)
print(" Fret " + str(incnfret) + ": " + str(round(incxcross,2)) + " mm at " + str(round(math.degrees(incfretangle),1)) + " degrees")
adjfretslotwidth = fretslotwidth/math.cos(incfretangle) / 2 # adjust for fret slot being on an angle
#####################################################################
############## Fret slot ne X ############
#####################################################################
# make slots much larger than required (i.e.: twice the bridgewidth) initially, then cut later
fretend1x = incxcross - (incfrettan * bridgewidth)
fretend2x = incxcross + (incfrettan * bridgewidth)
vnfs1 = Vector((fretend1x - adjfretslotwidth), bridgewidth, 0)
vnfs2 = Vector((fretend1x + adjfretslotwidth), bridgewidth, 0)
vnfs3 = Vector((fretend2x + adjfretslotwidth), -bridgewidth, 0)
vnfs4 = Vector((fretend2x - adjfretslotwidth), -bridgewidth, 0)
pointslistvnfs = [vnfs1,vnfs2,vnfs3,vnfs4,vnfs1]
nslotwire = Part.makePolygon(pointslistvnfs)
nslotextrude = Part.Face(nslotwire)
while (i < 1 ):
i = i + 1
nslot = nslotextrude.extrude(Vector(0,0,thicknessboard*2))
else:
nslot2 = nslotextrude.extrude(Vector(0,0,thicknessboard*2))
nslot = nslot.fuse(nslot2)
else:
nslot3 = fbextrudefs.common(nslot) # assembling all part (radius, bottom and fret)
nslot4 = fretslotradius.common(nslot3)
if zerofret:
nslot5 = cleanfretboard.cut(nslot4)
else:
nslot5 = fretboardnut.cut(nslot4)
#Part.show(fretboardfinal)
objet_fretboard = App.ActiveDocument.addObject("Part::Feature","Fretboard")
objet_fretboard.Shape = nslot5
print("End of fretboard")
########################################################################
print("6 - Add Scale Length")
########################################################################
Plane_scale_length = Part.makePlane(thicknessboard * 2 , (bridgewidth + (stringmargin1 + stringmargin2)), Vector(((scalelen1 + scalelen2) / 2), ((bridgewidth / 2) + ((stringmargin1 + stringmargin2) /2)),0), Vector(1,0,0)) #makePlane(length,width,[start_pnt,dir_normal])
#Part.show (Plane_scale_length)
objet_diapason = App.ActiveDocument.addObject("Part::Feature","Scale/Diapason")
objet_diapason.Shape = Plane_scale_length
###### close windows when macro is done #####
self.dialog.hide()
class Fretboard():
if App.ActiveDocument is None : # create new document called 'Fretboard' if no document is open
doc = App.newDocument("Fretboard")
dialog = QtGui.QWidget()
dialog.ui = Ui_Dialog()
dialog.ui.setupUi(dialog)
dialog.show()
Link
Guitar fretboard macro / guitar body
Version
- Version 0.1 : 2012-03-16
- Version 0.2 : 2018-01-25 : conversion pour PySide
- Version 0.4 : 2020-01-09: réfection majeure pour ajouter des frettes multi-échelles et frette zéro